Pallet Racking Accessories

We can offer a range of racking accessories to help you improve your warehouse operation and efficiency. The diagram below highlights some of our most popular accessories but if you can’t find what you’re looking for, please don’t hesitate to contact us.

Pallet Racking Accessories

Racking Run Spacer

1. Run Spacer

Used to maintain a fixed parallel safety clearance between double sided runs of racking.

Bolted Jointing Unit

2. Bolted Jointing Unit

Connects frames vertically, and ensures strength is fully maintained at the joints. Allows beams to be located up to the joint.

Frame Footplates

3. Frame Footplates

Essential for stability, allow racking to be bolted to the floor. Four duties available, to complement specific requirements.

Pallet Foot Supports

4. Pallet Foot Supports

Used in pairs across the beams, to support post pallets/stillages or caged pallets which have corner posts, skids or feet.

Fork Spacer

5. Fork Spacer

Used to maintain a fixed parallel safety clearance between double sided runs of racking.

Drum Chock

6. Drum Chock

Connects frames vertically, and ensures strength is fully maintained at the joints. Allows beams to be located up to the joint.

Racking Coil Cradle

7. Coil Cradle

Essential for stability, allow racking to be bolted to the floor. Four duties available, to complement specific requirements.

Racking Steel Shelf Panels

8. Steel Shelf Panels

Used in pairs across the beams, to support post pallets/stillages or caged pallets which have corner posts, skids or feet.

Stepped Racking Steel Shelf Panels

9. Stepped Shelf Panels

Panels span and sit within a pair of stepped beams minimising the shelf thickness. Made from pre-galvanised steel.

Stepped Racking Shelf Support

10. Shelf Support

Fitted to stepped beams, to provide additional support and greater loading capacity for chipboard shelving.

Racking Shelf Support

11. Shelf Support

Fitted to box beams, provides support and greater load capacity for shelving. Cladding location bracket also shown.

Racking Column Protector

12. Column Protector

Minimises the potential damage of forklift truck impact to racking upright.
Steel construction with foam rubber insert.

Racking Upright Protectors

13. Upright Protectors

Protects the lower section of XL uprights against fork truck collision damage. Available in ‘U’-shaped or right-angled configuration.

Rack End Protector

14. Rack End Protector

Provides protection to the ends of racking. Available also as a barrier rail (with support posts) to protect equipment and walkways.

Racking Signs

15. Racking Signs

Clearly display caution and loading/safety information relating to racking usage, and conform with SEMA guidelines.

Racking Guide Rails

16. Guide Rails

Allow safe and accurate guidance for trucks operating within racking,
particularly in drive-in or narrow aisle applications.

Racking Sprinkler Systems

17. Sprinkler Systems

Can be fitted throughout the racking structure for fire protection.

Racking Frame Cladding

18. Frame Cladding

Can be fitted, depending on the application.

Racking Safety Mesh Screens

19. Safety Mesh Screens

Fitted for safety, and the security of palletised loads. Often fitted where a walkway or working area is adjacent to racking.

Racking Picking & Deposit Stations

20. P&D Stations

Pick and Deposit (P&D) stations are used at the end of racks to assist in load handling between narrow aisle and other trucks.

Contact Us About Your Racking Accessories Requirement

If you have a requirement about any of our Warehouse Racking Systems please use the form below to get in touch.